Embedded Files
Assignment
Assignment
Objectives:
I can set up the wheel and know the tools needed for throwing.
I can center clay on the wheel.
I can create an even opening and bottom to the clay piece.
I can pull up on the clay to make the walls taller.
I can create a cylinder with evenly thick walls around ¼” thick.
I can decorate a ceramic piece using the sgraffito technique.
Practice: Throwing a Cylinder
Practice: Throwing a Cylinder
Practice requirements:
-Your cylinder needs to be about 5” tall.
-Your cylinder should be about ¼” thick.
-Top should be and even and as smooth as possible.
*Do not keep a cylinder until you practice enough to achieve these things.
*Re-wedge used clay and save, do not throw away.
Practice requirements:
-Your cylinder needs to be about 5” tall.
-Your cylinder should be about ¼” thick.
-Top should be and even and as smooth as possible.
*Do not keep a cylinder until you practice enough to achieve these things.
*Re-wedge used clay and save, do not throw away.
Sgraffito and Design
Sgraffito and Design
Assignment:
Create 4 sgraffito design sketches that you will use for your cylinder.
-Design should have:
A balance of positive and negative space
Incorporate repetition.
-Underglaze needs to be applied evenly onto cylinder.
-While cylinder is still leather hard, carve your design using a loop tool. *You are carving out the areas you want to be white.
20 points
Examples
Examples
Grading
Grading
Total points= 64 points
Student Examples
Student Examples
Report abuse